Skip to the beginning of the images gallery

OEM witte merk PoE-schakelaar - SW2624HIPOE-MGF-360-DIN

Name: OEM witte merk PoE-schakelaar - SW2624HIPOE-MGF-360-DIN
Brand: OEM
SKU: SW2624HIPOE-MGF-360-DIN
Price: 1028.50 EUR
Availability: InStock

OEM

Schrijf een review

Speciale prijs € 1.028,50 Normale prijs € 1.285,63

U bespaart 20% (€ 257,13)

Direct leverbaar

Momenteel klanten koop nu!

Witte merk PoE-switch - DIN-railmontage
24 Gigabit-poorten + 4 Gigabit SFP
90W-poorten 1-2 23-24/30W-poorten 3-22 / Maximaal 360 W
IEEE802.3af/at/bt | PoE/PoE+/Hi-PoE
VLAN/STP/RSTP/MSTP/ERPS/SNMP/ACL
Statische LAG/IGMP Snooping/DHCP Snoop/802.1x

Gegevens

Privémerk
Beheerbare desktopswitch
20 poorten RJ45 Gigabit PoE+ 802.3.af/at + 4 Gigabit Hi- PoE-poorten
4 Gigabit SFP-poorten
Ondersteunt PoE-vermogen tot 360 W totaal voor alle poorten
Tot 90 W op poort 1-2 en 23-24
Tot 30 W op poorten 3-22
Compatibel met PoE IEEE802.3af/at en Hi-PoE
DIN-railmontage

Interface	24 Ports RJ45 Gigabit + 4 SFP Gigabit Ports
PoE characteristics	Up to 90W ports 1-2 and 23-24 IEEE802.3bt Hi-PoE Up to 30W ports 3-22 IEEE802.3af/at PoE/PoE+ Maximum 360W
Supported Topologies	Ring / Star / Bus / Tree
Physical Layer Protocols	MDX/MDIX/Flow Control
Network Protocols	VLAN/STP/RSTP/MST/ERPS/SNMP/IGMP Snooping/802.1x/Port Isolation/QinQ
Management Protocols	SNMP/CLI/Console/WebUI/SSH/Telnet/Rmon
Quality of service	Highlighting and priority mapping Supports SP and WRR algorithms Rate limit QoS-based policies
Link Aggregation	Up to 12 groups
Jumbo Frame	10Kbyes
ACL	Supports 500 ACL of standard and extended type
Switching Capacity	68Gbps
MAC Table	16K
Packet Forwarding Rate	50,59Mbps
Buffer	12M
Installation	DIN rail
Power	DC 48 V ~ 58 V- The equipment does not include power supply. The following references are recommended: - DC48V5A-DIN
Dimensions	108 (D) x 104 (H) x 143 (W) mm
Weight	1,3 Kg
Operating temperature	-40º C ~ 75º C
Relay Output	Switch failure is reported via relay. The relay interface can be connected to a buzzer or other monitoring devices to achieve the physical layer shutdown alarm function. When the switch is off, RELAY1 and RELAY2 will change to the connected state and, therefore, the buzzer will sound and the monitoring devices will detect the switch failure and report the errors to the data center. This output cannot be configured at software level.